Service · Seawall Contractors

Seawall Contractors in Miami & South Florida.

Licensed seawall and bulkhead contractors with structural engineers on staff — one firm inspects, engineers, permits, and builds across South Florida

Licensed FL general contractor Engineer-led Structural engineers on staff Coverage Miami-Dade · Broward · Palm Beach

What to look for in a seawall contractor

Searching for seawall contractors near me returns a mix of marine builders, handymen, and engineering firms — and the differences matter, because a seawall is a structural retaining system holding your property out of the water. The right seawall company holds a Florida contractor license, carries marine-specific insurance, understands DERM and DEP permitting, and can show you engineer-designed drawings for work like yours. The wrong one leaves you with an unpermitted wall the county can make you tear out.

Souffront Contractors is a Florida-licensed general contractor with licensed structural engineers on staff. The same firm that designs your seawall builds it — no gap between the drawings and the crew in the water.

Seawall construction companies vs. one accountable firm

Most seawall construction companies build what someone else designed, and most engineering firms design what someone else will build. When something unexpected appears at the waterline — bad soil, a failed tie-back, a neighbor’s wall tied into yours — those two companies point at each other. Souffront closes that gap: we perform the seawall inspection, engineer the fix, pull the permits, and build it under one contract. Our engineer-sealed drawings and reports are produced in-house, and code-required special inspections are performed by our own licensed structural engineers.

Bulkhead contractors — the same wall by another name

In South Florida, bulkhead and seawall are used interchangeably: a vertical retaining wall along a canal, bay, or intracoastal edge. Cast-in-place concrete bulkheads, king-pile and panel seawalls, and cap-and-tieback systems are all structures we inspect, repair, and build. If you were searching for bulkhead contractors, you are in the right place — the engineering, the permits, and the construction are the same discipline.

What our seawall contractors do

Where our crews work

Souffront Contractors serves waterfront properties across Miami-Dade County, Broward County, and Palm Beach County — Miami, Miami Beach, Coral Gables, Key Biscayne, Fort Lauderdale, Pompano Beach, Boca Raton, and the surrounding waterfront markets. Crews mobilize from the same office that answers the phone: (877) 420-7220.

Service areas

We deliver this service across South Florida — from Key Largo north to Palm Beach.

Frequently asked questions

How do I choose a seawall contractor in South Florida? +

Verify three things: a Florida contractor license you can look up on the DBPR site, marine general liability insurance, and engineer-designed drawings for work like yours. Ask who engineers the repair — if the answer is nobody, or an outside firm the contractor has never worked with, keep looking. Souffront designs and builds under one roof, with licensed structural engineers on staff.

What does a seawall contractor cost? +

Inspections are a flat fee quoted upfront. Repairs are priced from an engineered scope — cap repairs and joint sealing sit at the lower end, panel replacement and tie-back systems higher, and full replacement is quoted per project based on length, height, access, and permitting. You see the full fixed number before any work starts.

Is a bulkhead contractor the same as a seawall contractor? +

In South Florida, yes — bulkhead and seawall describe the same vertical waterfront retaining wall. Either way the work requires the same structural engineering, DERM/DEP permitting, and marine construction methods. Souffront inspects, repairs, and builds both.

Do seawall contractors need permits in Miami-Dade and Broward? +

Yes. Structural seawall work generally requires a building permit, and work at or below the waterline typically triggers environmental review — Miami-Dade DERM, the Florida DEP, and in some cases the Army Corps. A contractor who suggests skipping permits is creating a problem you will inherit at sale time. We pull every permit as part of the job.

How long does seawall construction take? +

Repairs typically run days to a few weeks once permitted. Full seawall replacement usually runs several weeks of construction after a permitting phase that varies by jurisdiction. Because our engineers produce the drawings in-house, our permit packages go in complete — which is where most seawall projects lose their time.

Do you work with HOAs and condominium associations? +

Yes — associations are a core client base. Boards receive an engineer-signed assessment, a fixed-fee scope they can present to the membership, and one accountable firm from inspection through closeout. See our HOA compliance reports service for how board engagements are structured.

§ Schedule

Request an estimate.

Five fields. Same business day from a Florida-licensed engineer. Routed into our dispatch CRM in real time.

  • Same business dayAcknowledgment from a Florida licensed engineer — Mon–Fri 8 AM–5:30 PM.
  • Engineer-sealed reportAccepted by carriers, building departments, and real-estate transactions.
  • Fixed-fee proposalNo hourly billing. Repair scope priced line-by-line.
Direct line

877 · 420 · 7220

Form 01 · Inspection Request Live · CRM Routed
5CY7ADe973cSLEl4WDCW · v1 Routes directly to dispatch CRM
§ 13 — Schedule

Schedule your inspection before a small repair becomes a structural repair.

Same-day response Signed & sealed reports Fixed-fee quotes Licensed & insured · FL Engineer Lic. No. 72462